Single Facer Corrugated Cardboard Machine. 2 Layer Carton Box Production Line

Product Description

Single facer group =hydraulic roll stand+single facer+sheet cutter

SF280-1600 single facer machine

INSTRUCTON AND FEATURES

1. Paper feeding way is vacuum suction way and perfect flute formation in high speed production.

2. Available width:1200/1400/1600/1800/2000/2200 mm

3. Flute type: A, B, C, D, E, F,G UV

4. corrugated roller:φ280/300/320/360/380mm

5.Drive using chain drive

6. The glue coating part adopt automatic circulating glue feeding way (manual or electrical isolation device)

7. Pneumatic control to adjust the glue feeding and adjust gluing capacity electrically or manually; the glue

parts running separately while the main motor stopped, prevent paste from drying up.

8. It is equipped with the high pressure powerful air fan with the wind capacity adjustable device and silencer;

air source and electric control are in one cabinet

9. The machine wall made by cast iron and thickness 130mm

10. The corrugated roller materials 50CrMo alloy, the inner hole is fine bored, tempered and finish turned and

the surface is medium-frequency quenched, CNC polished and fine grinded and hard chrome-plated.

11. The corrugated roller diameter ¢280mm; Hardness can reach more than HRC60 which ensures good

wear-resistance and long life service.

TECHNOLOGY PARAMETERS

TECHNOLOGY PARAMETERS

Model	SF320-1400/1600/1800/2000
Working width	1400-2000mm
Heating way	Steam/electric
Flute type	A B C D E F
Operate direction	Left or right according to customer's factory
Designed speed	100m/min
Economic running speed	80m/min
Temperature range	160-200ºC
Steam pressure	0.8-1.3Mpa
Air source	0.4-0.8Mpa

RS-1600H Hydraulic Mill Roll Stand

MPORTANT FEATURES

Working method: Hydraulic

Working width : Max1600/1800/2000mm

Min 600mm

Roll diameter : Max φ1500mm

Min φ350mm

Single side max loading: 2.2 tons

Main bearing diameter of stand: 240mm

Speed :Suitable for 0-150m corrugated cardboard line

Air pressure : 0.6-0.9Mpa

Total power: 4.0kw

Voltage : 380v 50Hz (or depend on clients)

HYDRAULIC SYSTERM PAREMETER

Working pressure: 1.2-1.6Mpa

The diameter of oil cylinder (clamping): φ100mm×φ420mm

,φ63×φ760mm

Motor power of hydraulic unit: 4.0kw (continuous work)

working voltage of Hydraulic unit electromagnetic valve:

:customize

STRUCTURE CHARACTERISTICS

Symmetrical structure can install two rolls of paper at the same time and continually change

paper

Full hydraulic control paper roll damp, life-lower, loosen, clamp, left-right movement.

Adopts pneumatic tension to adjust basis paper tension

4-point brake control paper tension, manual control, also can control tension with splicer

together.

NC Reel sheet cutter +stacker

INSTRUCTON AND FEATURES

1. Single knife sheet cutter can do set-length cutting reel paper and single facer board, change

order fast, high cutting precision, fast work speed, low waste, it also suit for color-printing box

package.

2. Adopts adjustable-speed motor reduce the fault caused by transmission wearing.

3.teeth surface be quenching and grinding, high precision transmission, low noise, transmission

part lubrication adopts oil pump automatic recycle design.

4. Used high speed flat type knife, high hardness with long use life. Precision adjustable gapless

gear ensure accurate mesh, good cutting with high straightness, protect knife

Autom atic stacker

1. The Max. Speed of coloection paper:70m/min

2.The Max. Length of collection paper :1200mm

3.This machine can be collected at the same time at most 4 pieces of paper

4.The machine can realize count automatically, automatic stacking, automatic stamping

5.Stacker hight:100mm

6.The machine have special leading edge Aligning institution

7.The automatic stacking machine cost is low,Small footprint, save manpower,Is the best choice of

medium-speed fitting machine.

8.floor area:3.8*1.9m

TECHNOLOGY PARAMETERS